Do All Traps Repair Parts

Thermostatic Steam Trap Repair Elements (Cage Units)

For All Makes & Models (VAC-300 PSIG)

See our Muzzle Unit Nomenclature List

Features

• Single Source for ALL your thermostatic trap elements
• Available for over 800 makes and models
• Ane-piece repair reduces maintenance time and aggravation. (In some instances a new embrace is needed on the showtime installation only. Consult the B&J Steam Trap Repair Guide.)
• No special tools needed for installation
• The only repair element bachelor today that is calibrated to ensure maximum sensitivity in the field
• Every chemical element is mill tested, nether live steam, earlier shipment to you lot
• Improves original trap's functioning with a payback in fuel savings within weeks
• Over eighty years repairing millions of steam traps

Clarification

The Cage Unit compromises all working parts of a thermostatic steam trap including the seat. All parts are calibrated together nether actual steam weather condition at our factory and are locked into the precisely correct working relationship within a stainless steel housing. This is a i piece, stand alone, fully removable and testable "trap inside a trap". There are no loose parts to contend with; gone is the potential of overtightening, undertightening, crossthreading or misaligning assorted pieces of a "repair kit".

To the user, calibrated construction of a Barnes & Jones Cage Unit of measurement offers the balls that every chemical element will operate with the same functioning in the field as it did when tested in our factory. This guarantees a greater sensitivity than could every be promised with a bag of uncalibrated parts or any uncalibrated chemical element.

Along with the fuel savings that accrues with the use of a more sensitive element, the Muzzle Unit offers increased efficiency with maintenance as well. The 1 piece construction allows for removal and testing of the element exterior of the original trap body.

Adaptions of the Muzzle Unit of measurement are available for more than 800 makes, styles and sizes of thermostatic steam traps for low, medium, and high pressure service. Even if your system consists of traps from Dunham-Bush, Hoffman, Nicholson, Sarco, Warren-Webster or any other brands, Barnes & Jones Cage Units tin can repair them all! Ask for or consult the "Steam Trap Repair Guide" to observe the Muzzle Unit of measurement specifically designed to upgrade the working parts in your particular steam trap.

Practise NOT be fooled by others offering a quick fix with nuggets, capsules, discs or other control devices for steam traps. Barnes & Jones has been repairing thermostatic and float & thermostatic steam traps for over fourscore years and is the acknowledged leader in production operation and design.

Mutual Methods of Checking Traps

Some people feel that a hot render line from the trap indicates a leak. Others listen to the trap for a tell tale whistle. Neither method is practical! A trap which is cycling properly will discharge condensate near saturated steam temperature. Plain the return line will exist hot also. In a closed system, piping volition carry noises for long distances. With several traps in the vicinity, listening will not e'er pin indicate the specific trap that is bad.

Observing the discharge from the traps is the but positive manner of checking the operation of a steam trap! Only then can you make up one's mind whether the trap is cycling properly and if it closes tightly. To do this in a closed system it is necesary to valve the discharge at each trap, so that the discharge from that trap is isolated from the residual of the system and the condensate can be dumped to atmosphere from the trap torso. It is of course a more costly installation merely worth the added toll in the long run. Traps installed outdoors by and large discharge to atmosphere and their functioning can be observed readily.

If it is deemed too costly, or is physically impossible to valve the discharge of every trap, the merely possible way to bank check the trap performance (unless y'all use Barnes & Jones traps or Cage Units) is to remove each trap, mount information technology on a test rack and detect the operation. This can be time consuming and plush, perhaps as costly every bit to forget preventative maintenance and simply wait for each trap to fail badly before repairing information technology.

B&J Makes Trap Checking Easy

The Barnes & Jones thermostatic trap or whatsoever brand of thermostatic trap with a B & J Muzzle Unit of measurement interior can, even so, be hands and accurately tested by periodically replacing the Cage Unit. Then the Cage Units that have been removed can be tested in a representative trap body that has been fastened to a steam line.

This tin exist done with consummate accuracy as each Muzzle Unit operates independently and the trap body acts solely as a housing. This is not possible to do with other manufacturers' elements whose performance is dependent upon the relationship of a screwed in seat, element, lock washer and cover with the original trap body. The Cage Unit combines all these parts in an unalterable working relationship.

Source: https://barnesandjones.com/products/repair-elements-cage-units/

Posted by: gilleygiathe92.blogspot.com

Share this post